Ferndale FL Wildlife Removal

Serving Ferndale, FL – The Lake County Florida Nuisance Animal Organization

Bay Lake

Lake County, FL – Many of Ferndale’s wild animals have learned to adapt and even thrive in our homes. For example some wildlife have found that attics make great places to live. Other animals find refuge under homes or porches. Invariably, these animals cause damage. Rodents, like squirrels and rats, love to chew on electrical wires once in an attic, and this causes a serious fire hazard. Raccoons can cause serious contamination in an attic with their droppings and parasites. Same goes for bat or bird colonies. We specialize in solving Ferndale Florida’s wildlife problems, from snake removal to large jobs like commercial bat control, we do it all.

Lake County Wildlife Removal Services

Orlo Vista

As we’ve mentioned, it is extremely important to take additional steps beyond simply capturing and removing critters and wildlife from your home. At the absolute minimum, we recommend allowing us to find the entry points that animals use to gain access. Our licensed wildlife technicians  here at The Lake County Florida Nuisance Animal Organization are fully trained in proper techniques to find, fix and completely seal any and all entry points. We’ll also do a full exterior scan of your home to point out any areas that could result in future wildlife problems. Our technicians are able to recommend prevention strategies that will ensure there are no available entry ways for animals to take advantage of in the future.

Umatilla

We do not handle dog or cat problems. If you need assistance with a domestic animal, such as a dog or a cat, you need to call your local Lake county animal services for assistance. Lake County Animal Services or Humane Society: (352) 343-9688

pest removal service

Animal Removal in Ferndale Lake County Florida –

What Equipment is Needed to Trap a Skunk?

How to Get Rid of Squirrels With Repellents


Taft

Trapping is a good way for kids to explore the outdoors, learn about animals, their habits and habitats. For some people the desire to trap never fades as years pass. For other the desire to trap doesn't come until later in life.

The following is in essence the basics of trapping. This will cover the most popular species trappers' target. The basics of trapping will also cover methods experiences trappers use to trap them.

Beavers and Muskrats:

Two of the most popular species trappers pursue are beavers and muskrats. Experienced trappers tend to trap beavers and muskrats in the winter, but for a beginner; trapping these species may be easier to trap in the spring and fall. The most commonly used trap for beaver is the 330 conibear. Check your local state laws; sometimes the law requires this trap to be fully submerged in water.

Beaver set, trappingYou should stake the trap in areas were beavers like to hang out. Such as dams, bank dens, beaver lodges, culverts, and/or canals between two bodies of water. Beavers prefer to be in slack water, which is what beavers create when they build dams. Slack water, which used to be known as 'the stand of the tide', is a short period in a body of tidal water when the water is completely unstressed, and therefore no movement either way in the tidal stream.

A good way to find places to trap beaver is to contact the county highway or land department. Many times they are having problems with beavers and are very happy to have a trapper take care of the problem for them.

You want to select a spot on near the water's edge where you see mink tracks and the trails they have been using. Make your trap bed and place trap in it and cover it with leaves and grasses to make it look natural and blend in with the surrounding area. A tip from the experts, place sticks on both side and the back of the trap bed to guide the mink to step on the trap.

Raccoon:

Raccoons can be found almost anywhere in North America. Raccoons are a very commonly trapped furbearer. Raccoons can be found mostly in wooded areas and near water. Raccoons are a very curious creature, and because of this they can be trapped in almost any set. The most common trap to use for a beginner is the 220 conibear. Raccoons are very predictable creatures they will use the same trails along streams, ditches, rivers, and ponds. Set a 220 conibear along these trails for best results.

Above is just the basic a new trapper should know. Never stop educating yourself about trapping and trapping techniques. The best form of education is to find a mentor that can pass down years of wisdom to the younger generation.

If you like this article; please posts a comment or pass it on. Thank you.

  • Raccoon Feces Clean Up

  • Squirrels Removal From Attics

  • How Do You Find the Areas Where Bats Are Getting In?

Squirrel Control Services


free animal removal services

If you have been hearing attic noises, skunk odor creeping its way into your home or an animal living in your chimney, it can be intrusive and truly frightening. Aside from that, nuisance wildlife in your home can cause serious damage and even pose a serious threat to you, your family and even pets. Attempting to get rid of unwanted wildlife yourself can not only be dangerous and illegal, it can also really complicate the problem. Animals that have had failed attempts at capture, almost always learn the working of a trap and will never enter one again. If they do, they usually get pretty good at stealing the bait right out of the trap without setting it off. If you are looking for a wildlife removal company near you, we are your complete resource to MI wildlife removal solutions, information and wildlife control companies near you in Michigan.

  • Get Rid of Skunks Under Homes

  • Squirrels in Homes - What Damages Do They Cause In Attics

  • Find and Seal Any Points of Entry for Bats

How to Repel Raccoons With Repellents


Plymouth

Want to know more about the ABC's of what this area under discussion has to propose to every human being who is willing to do things for themselves? During an inspection of the structure needing bat eviction I can determine the size of the colony and the best time of the year to remove the bats. During certain times of the year bats form nursery colonies. Depending on your geographical area the bats can only be removed when the young bats are able to fly. We like to use a one-way door or referred to as a valve.

These unidirectional escapes lets the bats escape not allowing the bats back in. This type of bat control eviction is approved by the organization Bat Conservation International. The utmost critical thing in bat removal from a residence is attention to all the little construction gaps. When closing all construction gaps, anything larger than an a quarter inch should be sealed. You have to seal the entire home to foil bats from getting back in. You will go as far as sealing any fault or construction crack. Ill need to exclude vents to keep bats out, let's start by closing off louver vents, attic vents, and ridge vents if bats can breach them using 1/4 inch screen. These can be painted to match, but I have found it blends in nicely left unpainted.

Inspect chimneys, bricks and mortar may be loose forming gaps. Look for gaps around where the chimney goes through soffit, carefully seal gaps and install a one-way door, if a bat way in is there. Ridge venting systems are feasible bat entrances. When looking at the ridge vent closely you'll usually find the plastic ridge vents deform leaving gaps, I've seen where varmints have chewed a gap in the vent. I will do away with the previous roof vent system and replace it. Primarily, you lay down 1/4 inch hardware cloth this keeps the bats, mice and squirrels from getting through. We will install a one-way bat door here also if the bats were using this area. Finally you'll finish the attic vent with a vent system referred to as Cobra vent, and then finish it with top cap shingles. We try to color match any calking, tin work and exclusion work to make it merge in as if we have not had to fix the construction defects. We use paintable caulking, the silicon based calks will tinge over time.

I build my own one-way doors. After ten years of bat control, I came up with an easy effective one-way valve for bat removal. You can purchase commercially produced bat cones but I personally think they are too short and have no airflow at the base where it is attached to the structure. These one-way doors are left on for about two weeks, to let bats leave. Then I can remove the one-way door and then block the entrance. After the bats have exited through the one-way doors the bats will try for several nights to get back in, by looking for another entrance, this is why sealing every possible entrance needs to be done. This is how to evict bats.Find out more by reading our other articles on this topic and other subjects we have written related to it.

  • Raccoon Pest Control - Traditional Pest Control Methods Are Ineffective

  • How to Clean Your Attic After You've Had Bats?

  • Do Squirrels Carry Rabies?


Lake County Florida Wildlife Control